How much weight is allowed in 20 ft and 40 ft container?
We have made an overview below the dimensions including the loading capacity (payload) of the most common container sizesHope this answers the question. We have much more information on how to buu a shipping containere here; BoxHub | Home
How do I calculate number of bricks and cement required for a room ?
Suppose your room measurement is 3m x 5m and there is a door of 1m x 2m and the height of the room is 3m and the thickness of the wall is 23 cm.Then centre line length of this room will be 2[3.23+5.23]=16.92 mvolume of brickwork is 16.92 x 0.23 x 3=11.67cumdeduct for door [1] x 1.0 x0.23 x 2= 0.46cumdeduct for lintel over door [1] 1.3 x 0.23 x 0.1=0.03cumnet brickwork volume is 11.67- [0.46+.03]=11.18cumSuppose you are laying this brickwork in cement mortar 1:5[one of cement and five of river sand] using second class ground moulded chamber burnt bricks of size 9″ x 4 3/8′ x 2 3/8″’ then for one cum of brickmasonry, you require 460nos of bricks; 0.25 cum of river sand; 0.05 cum of cement. Since one cum of cement weighs 1440 kg, for 0.05cum , you require 72kgwe found the net volume of brickwork as 11.18cumHence number of bricke required is 11.18x460=5143nos; river sand required is 11.18 x 0.25=2.795cum; cement required is 11.18x 72=805kg
A warehouse stacks 3 identical large boxes and 2 identical small boxes to a height of 11 feet. It also stacks?
You just got a Tetris !
Could you please tell me the cheat codes of GTA 5 San Andears and how to unlock banned cities on the map?
http://www.cheatcc.com/
One square meter is equal to how many cubic meters?
Although square meter is a 2 dimensional unit for area while cubic meter is a 3 dimensional unit for volume, we do have 1 cubic meter = 1 meter x 1 square meter.So, there is your "conversion factor", "1 meter".You can probably see that this is just arbitrary nonsense.If you have a 1 square meter piece of board, the volume depends on the thickness.1 cm thick, 0.01 cubic meters.2 cm thick, 0.02 cubic meters.To answer the original question, there is no direct conversion without more information on the thickness or depth.