I can't access my wireless router admin page. What could be the problem?
- You have the wrong IP address. Not all routers use 192.168.1.1. - You may not be connected to your router. - Admin page could be disabled.Disconnect your Ethernet cable from your computer OR disconnect your computer from the Wifi connection. Give it a couple seconds then reconnect. After you connect, try again. AFTER EDIT:This problem seems to be fairly common with this model router. 1. Try pinging the router to see if the problem is with your browser rather than the model. Open command prompt and type "ping 192.168.1.1". Give it a few seconds and you should see something along the following "Pinging 192.168.1.1 with 32 bytes of data: Reply from 192.168.1.1: bytes 32..." OR "Request Time Out". If you get a reply, you know the problem is likely your browser, as your company is successfully connected and speaking to the router. So try a different browser, Internet Explorer (Edge) or Chrome for some reason often work best with routers. I sometimes have problem with Firefox when accessing a router's admin panel. If you get "Request Time Out" then the problem is somewhere between the computer and router, as in your computer can't see the router OR someone has changed the Admin IP address to access to panel. 2. Attempt what a TP-Link tech posted on another page... a. You need to use the supplied network cable, connect it to any LAN port. We need to disable the WIFI for a moment.b. Turn off the wifi, there is a button at the back of the router, just push this and check the WIFI LED is off.c. You should be able to access the router setup page now.d. Go to Access Management, disable the UPNP. Save and activate.e. Push the wifi button at the back to enable back the wifi. If these 2 things don't work, you can always try factory resetting the router.
How to set up wireless internet on a ClearAccess AG10W Router?
You should contact your telecommunications provider for assistance. It's super easy to use and setup, as long as phone company you have supplied it. If the router was bought on ebay it won't have the control panel.
How can I find the username of my wireless router?
The name you see when you search for wifi is the router name, but the security code is different. The Username and password to get into the router control panel should be in the router manual, but it is usually admin admin or admin password. To get into the router control panel, get on a computer already connected to YOUR wifi and type 192.168.0.1 into the browser's url bar. If that doesn't work try 192.168.1.1. Now you can change the security code. You can't see you old security code, but you can now change it to something else. Write this down and tape it to the router. Now you can use the new code to get onto the internet. P.S. You will need to change it on your old laptop too if you want to ever use that.
Can i encrypt my wifi router to wpa or wpa2?
i got a 2wire gateway router from at&t my encryption key is a wep can upgrade it to wap or wap2 and how and how does it work? 2 days ago - 2 days left to answer.
Belkin N300 wifi router light is orange?
If you can tell by my previous questions, I'm in some stuff. I had a Belkin n300 wifi router that had been working perfectly fine, until one day I came home and the light was orange. I've tried recycling, rebooting, restoring, etc. but nothing works. When I troubleshoot it, it says "The DNS server is not responding." I didn't mess with, let alone know, what the DNS was. It says we're joined, but there's no Internet access. It also won't work on my phone, tablet, and my xbox. I have Windows 7. What's going on and how do I solve this problem?
Wireless Router Setup ?
i have eagletec wireless router but I forgot how can I go to the admin panel of the router, as lost my manual.The model no and details are as follows, Thank you Model No.: ET-WR254 Name: 802.11b+g router Interface: AP/Router/Switch The product catalog page here: http://www.eagletec.net/proditem.html?uid=5796 Thank you,