How do I transfer Data between two laptops?
How to Share Files Between Windows, Mac, and Linux PCs on a NetworkHome file sharing used to be a nightmare, even between different versions of Windows — never mind Mac and Linux! These operating systems can now talk to each other and share files without any special software.We’ll be using the SMB protocol for this. Windows uses SMB for file sharing, while both Macs and popular Linux distributions have built-in support for SMB. Microsoft even submitted patches to the open-source Samba project to improve it![1] FOR MORE DETAILSFootnotes[1] Digital World
How can I transfer data between two laptops by a LAN cable?
Step1: Connect both computers with a LAN cable. You can use any LAN cable (crossover cable or ethernet cable); it doesn’t matter in the modern computer.Step 2OK, now you have to turn ON sharing option on both computers.Go to Control Panel > Network and Internet > Network and Sharing Center > Advanced sharing settings.And make sure you turn on network detection and turn OFF Password Protection. This way, you don’t have to type in your password each time, when you are trying to access it from another computer.However, this is also a significant security risk. So, make sure you turn on Password protection once you are done.Step 3Bring both the computers on the same network.1. Open Control Panel > Network and Sharing Center.2. You will see Local Area Connection or Ethernet.3. Right-click it and go to its properties.4. You will see TCP/ ivp4 option there and select its properties.5. Select this use the following IP address.Put the following value on 1st computerIp Address 192.168.1.1Subnet mask 225.225.225.0Default gateway 192.168.1.2Off curse it’s not necessary you use these IP address, as long as they are in same range, you are good to go. However, if you are not sure, what this all means, better stick with this example.Put the following value on 2nd computerIp address 192.168.1.2Subnet mask 225.225.225.0Default gateway 192.168.1.1Basically, what we are doing is keeping the subnet mask same and changing the IP address.If everything works right, you will see the two computer name in the Networks settings.Step 4Share a folder on LANAssuming that you have connected the cable properly and enable the sharing option now it’s time send files from one computer to another, this is quite simple1. Select the folder you want to share, right-click it.2. From the drop down option, click on the share with > specific people.3. On the drop down menu select Everyone > add > click share.
Convert Hp 2175 psc to wireless to enable wireless printing on network?
I have a HP 2175 All-in-one printer. It is connected to my desktop and sharing is enabled. I have 3 other laptops and every time i need to print something from them I have to turn on the desktop and then print. I need a solution to be able to make the printer wireless. I know there ae plenty of wireless print servers out there but i'm wondering if investing in one is a smart choice or just buying a new wireless printer should be the way to go. I love my printer and it is quite economical so I don'tt want to give it up. Any suggestions and advice would be welcome. Any cheap and affordable solutions would be highly appreciated.