What is the flex position in fantasy football?
The Flex position is one of the most valuable positions in the game. It is the only slot where you can start 3 different types of players. In standard leagues, an owner is allowed to play either a RB, WR, or TE.The best way to create value at the Flex position is to fill in all your one position slots (RB, WR, ect) and use the top player that is leftover. For example, if you have Mark Ingram and Spencer Ware as your starting running backs, Larry Fitzgerald, Dez Bryant as starting wide receivers, and Antonio Gates at your tight end, you could have players like Mike Wallace, Bilal Powell, or Jack Doyle on the bench. You would then choose Mike Wallace as your Flex if you believe he is the best out of the three.Hope this helps! If you are have more questions about fantasy football feel free to check out my website about Fantasy Football for more insight and rankings.
In fantasy football, what is flex?
In standard leagues, the Flex position can be filled by any running back (RB), wide receiver (WR), or tight end (TE). For that reason it is denoted W/R/T on some sites.Some leagues will have, either in addition to or instead of the Flex position, a W/R spot that can only be filled by a WR or RB. This is functionally similar to the Flex spot because the TE position is much more shallow in terms of fantasy scoring than either WR or RB.
W13: Which 3 of these 5 RBs should I start?
Peyton Hillis(vs NYJ) Steve Slaton (vs Jac) Larry Johnson (vs Oak) Warrick Dunn (vs NO) Mewelde Moore (vs NE) ---- I am leaning towards Steve Slaton, Warrick Dunn as must plays. Then I need to decide whether to play Johnson or Moore... I'd probably have to play Johnson because hes up against Oakland. What do you guys think?
Should I start Tyreek Hill, Dez Bryant, Doug Baldwin, or Will Fuller this week?
How many of them can you start? Would you put any of them in your flex spot instead of running backs? There is painfully little information here.Anyways, I would probably say in this order:-Tyreek Hill-Dez Bryant-Doug Baldwin-Will FullerSo if you can only start 1, stark Tyreek. If you can start 2, Tyreek and Dez. 3, throw in Baldwin.
What are the prospects of a flex printing business in India?
If you are starting your flex printing business specially is small town or city I will recommend you to leave the plan and try something else. There are hundred of reasons not to start this business.Lack of WorkSmall towns and City have small businesses and no big customer you will find there. if you are printing 100 or 200 SQR Feet you cannot maintain your machine in this amount of Work. generally people looks 2x3 flex banners for their business in small cities and it will a very cheap job you cannot live with it.A flex machine need at least 4 MemberA Designer (10–12 K ) Salary per monthAn Operator (8-10K) Salary Per Month2 Helper (7–8) Salary per month.1 litters ink 500 RS (4 Litters) CMYKSolvent (400 RS litter)Power (4000–16000) Depend of Consumptionrest daily expensesMonthly Expenses like internet bill, Water Charges and extraTotal 60000 RS per MonthIf you are printing 5000 SQR Feet daily you are okay in this business but 500SQR feet is not a good score to earn good for you and your team.I am not giving some this advice personally but according one of my family member still you can try it once.https://www.amazon.in/gp/offer-l...
Dodge Ram B250 1994 Starting Problem ????????????
if you van has a security system in it, it could be causing this problem. they usually disable the starter circuit. Paul has listed good places to start. but if they don't fix it do this: when your trying to start but its not working have some one check voltage at the starter. there are 3 points to check 1: where battery cable connects 2: where starter connects to solenoid 3: small wire that operates solenoid. if there is voltage at all three point replace starter it has a shorted / open spot on armature. voltage at 1 and 3 but not 2 replace solenoid. voltage at 1 but not at 3 and you have already checked the items Paul identified check wiring between neutral safety switch and solenoid.
Need help for tonight!! Start Matt Cassel or Jamal Charles?
I have my flex spot open tonight and I can either put Cassel or Charles in there. I NEED 23 POINTS FROM ONE OF THEM! I know its a tall order, but who do you think has the best chance to do it? Heres how the league's points are: QB Scoring: 25yds per pt 4pts for TDs -1 for INTs RB Scoring: 10yds per pt (rush/rec) 6pts for TDs (rush/rec) -2pts Fumbles lost .5pts per reception Thanks!!!