I Need Driver And Software For Beetel Fun Laptop Tv Tuner.

How can I convert a wifi dongle into wifi adapter?

Try this it worksYou should have elaborated your question, But still i will give a possible way to spread the internet in your computer or laptop through the WIFI Dongle you are havingIf you have a Computer with a internet connection via the Ethernet or USB etc. and if you want to spread that signals as WIFI using your dongle then follow these steps.Connect your Computer to Internet.Connect the Wifi Dongle to the computerOpen Network and Sharing CenterClick on the “Change Adapter Settings” optionYou will see the active internet connections and other devices in the window.Now select the active internet connection and the WiFi dongle using CtlrNow right click on one of them and Click on the “Bridge Connections” optionWait for few sec for it to complete the process.Now connect to the Dongle’s WiFi using any of your other devicesYou will have access to internet.

I'm not able to connect my dongle to a Windows 10 laptop. What should I do?

Just follow the steps below:Method 1 (Older Method works fine with Windows 8):1. uninstall the software if already installed.2. open the modem in new windows and set its (modem_installation.exeand show_modem.exe ) compatibility to windows7 then press OK.3. Now install the software , then restart the system .4. Connect the modem and start the software ( it shows no device ) then exit the application from the task manager .5. Open the Device manager ( control panel > Administrative tools > Computer management )6. Go for Other devices , simply uninstall all the drivers related to modem there (better uninstall both with or without yellow mark)7. Go to Action menu and click on Scan for hardware changes .8. Now simply open the MMX usb manager and it works fine.Method 2 (Updated Article January 2014 for Win 8/8.1 both):1. Install the MMX modem application in compatibility mode as above, then restart your system.2. Next go to your installation folder as:x64 bit OS –> C:\Program Files (x86)\MMX353G 3G USB Manager\Driver\Win7_64x32 bit OS –> C:\Program Files\MMX353G 3G USB Manager\Driver\Win7_323. copy the file cmnsusbser.sys and paste it to C:\Windows\System32\drivers folder do replace if any older version is already present. Better save the older file before replacing it with new one.4. Now, go back to installation folder and simply:right click cmnsmdm.inf and click install,then right click cmnsser.inf and click install.5. So its done then, only note that you must open the application from the desktop icon. Enjoy your MMX 3G modem in windows 8.1. Have fun guys.source: usb modem not working windows 8/8.1 (SOLVED)

How many devices can connect with a WiFi modem?

There are some excellent answers here, including solid technical information:How many concurrent users can a single Wi-Fi AP handle?A summary of these answers explains these facts:The 802.11 spec supports 2007 simultaneous connectionsBut practical constraints reduce this greatly.* Most consumer routers would choke beyond anywhere form 15~70 devices depending upon the router/access point architecture. The better ones support more connections.Routers and AP with two or more radios count as separate access points. They support 2 or 3 times as many simultaneous connections.As a practical matter, multiple connections reduces the bandwidth available to each connected device. You can expect a degraded experience from any router (even the newest AC routers) if, say, 10 or more devices are streaming video content or backing up data across a shared wireless connection.*  Designers make hardware and software trade offs that limit the number of simultaneous connects. For example, there is limited storage available for WAP/WPA encryption keys. Also, newer MIMO antennas are software controlled to “steer” the radio beam to each connected device.