Just Received And Opened Acer Iconia W3 Tablet Turned It On And My Account Has Been Disabled

What is an authentication problem in WiFi? How can I solve it?

First check your router screen. You may have, by mistake, added extra characters to your Wifi password on the router. Click the box for Wifi information on the router and delete those extra characters.. If the router screen password is found okay but still the authentication problem persists, then try changing security protocol (for example, if it's WPA - change it to WPA2) on the router. and try entering info manually, clicking forget and using "add network" option in the phone's WiFi settings.

What causes ghost-touch on some smart phones with touch screens?

It depends on when it happens. If it only happens when you’re charging, it’s usually the result of using a poor-quality or damaged charger with too much ripple on the output. Try the charger and cable that came with the phone.If it happens when on batteries, it could be a dirty screen, or faulty digitizer.

On my Android phone, I am getting authentication problems when I connect to my network, even if the signal strength is excellent. What should I do?

Authentication problem occurs when the “handshake” between a router and a gadget fails for any number of reasons. The handshake first consists of the gadget sending a connection request along with the password in an encrypted form to the router. The router encrypts the copy of the password stored on it and compares the received data. If it matches, it sends an acknowledge signal and the devices are connected.Try these things out:1) Forget the network in your phone and enter the password again. It probably saved the wrong password.2) Reset the router. On all routers there will be a small reset button. Keep it pressed for about 5-10s till all the lights glow and release it. The router is now back to the initial setup when it was bought. The default ssid and password will be printed on the bottom of the router. Try connecting to the router using these. If it connects you can now try and change the ssid it back to the original one.3) If even this fails, then go to the router home page by opening a browser on a device which is able to connect to it (either through WiFi or LAN cable) and enter 192.168.1.1 or 192.168.0.1 and wen requested for a username and password, look for them under the router again. It is usually admin and admin/password. Explore around till you reach the wireless setup page with the option encryption scheme. It is wpa2-psk by default. Change it to wep. This is an older encryption scheme which is not as secure as wpa2-psk but it's enough for a home network. Enter an 8 character password and save these settings. Now give it a try. If this works then your mobile probably has some problem authenticating with a wpa2-psk based router.Good luck and Happy debugging!!!

How can I use the power or the volume button as a camera shutter in my Android phone?

I think now a days all android phones get this feature of clicking photos with power button or volume keys .Probably the thing is that sometimes they are not enabled by default so you have to go to the camera settings and enable that feature.There are many other features like by pressing power buttom you can shoot images in burst mode.Or you can configure that when you press the volume key the camera clicks photo aur zooms in or out or focuses on the object. (AS ON MY DEVICE)Now a days photo clicking apps like B612 and retrica are famous. These apps also provide these features, you just have to enable them.