Kamry k100?
Hi wiring starter solenoid cable to starter motor or even the starter motor itself so time to get it all checked out.
There’s a lot that can be going wrong.I suggest all of the following steps and doing them in this particular order.Unscrew your atty and clean the contact pin on the atty itself and on the mod. Of course you should do this only after you disconnect the battery or turn the mod off (I’ve no experience with your particular mod). And by clean I mean thoroughly wipe them down with a paper towel so there’s no juice on them.You should adjust your wattage way way down to around 10 or 15 when you get a brand new coil in your tank after you let it prime of course.You may not be priming the coils enough. Take a small sewing needle and gently stab the cotton on each of the windows two or three times (assuming you’re using prebuilts). Sometimes the coil is too well built (thus rendering it poorly built) and the cotton is too thick or tight on the wire and can’t absorb juice fast enough or at all. I had the priming issue when I started using the Vandy Vape Mesh. It has so much wicking that it takes a ridiculous amount of juice to get the cotton soaked.If none of the above has worked try switching brands of coils if you’re using prebuilts.If nothing else works, try your atomizer on another mod if you can with the old and new coils. If the atty works its your mod that’s the problem. If it doesn’t it is probably the atty. However just to rule out the mod being part of the issue, try a second atty on the first mod. If the second atty doesn’t work on your Kbox then it’s definitely the mod.
HELP!! my kamry k100 wont fire with a TF 18650 3000mAh battery?
try using a better battery
There’s a lot that can be going wrong.I suggest all of the following steps and doing them in this particular order.Unscrew your atty and clean the contact pin on the atty itself and on the mod. Of course you should do this only after you disconnect the battery or turn the mod off (I’ve no experience with your particular mod). And by clean I mean thoroughly wipe them down with a paper towel so there’s no juice on them.You should adjust your wattage way way down to around 10 or 15 when you get a brand new coil in your tank after you let it prime of course.You may not be priming the coils enough. Take a small sewing needle and gently stab the cotton on each of the windows two or three times (assuming you’re using prebuilts). Sometimes the coil is too well built (thus rendering it poorly built) and the cotton is too thick or tight on the wire and can’t absorb juice fast enough or at all. I had the priming issue when I started using the Vandy Vape Mesh. It has so much wicking that it takes a ridiculous amount of juice to get the cotton soaked.If none of the above has worked try switching brands of coils if you’re using prebuilts.If nothing else works, try your atomizer on another mod if you can with the old and new coils. If the atty works its your mod that’s the problem. If it doesn’t it is probably the atty. However just to rule out the mod being part of the issue, try a second atty on the first mod. If the second atty doesn’t work on your Kbox then it’s definitely the mod.
CAMS are Karvy are totally different from these entities you mentioned.Understand the ecosystem of Mutual Funds. MFs are sold by middlemen (or entities engaged in advisory business. So MF is manufacturer and middleman/advisor is the seller. The seller sells to customer physically or through online portals like a platform or a website. Scripbox and fundsIndia are the middleman who have developed there own platform to sell MFs.When the MF is sold there is one more entity in between the Customer/Seller and MF. These are registrar & transfer agents. CAMS & Kavy are two of them. There job is :For Investor: Post investment service like keeping records of units, transactions, acting as point of sales for MFs & Customer service.For Middlemen/Broker/Agent: Brokerage related services, Point of sales & Data/MIS etc.
Hi,Cams/Karvy are Registrars, who process the MF Applications. All required statements are available on their website under investor link,NSDL CAS is a single account statement consisting of transactions & holdings in investor's demat account(s) held with NSDL & CDSL as well as in units of MF, Life Insurance. National Securities Depository Limited CASThanks
I need some context to actually answer this question. Which means I needs answers to the following questions before I can even begin to guess who would win:What magic system are you using?How much prep time do they have?How much training have they had?What is the terrain?Are there any usable corpses nearby?What are the rules for the duel (assuming it is a duel)?Is it a fight to the death or some other win condition?What are the personalities of the combatants?What style of Warlock or Necromancer are they?Is there a chance they could be interrupted by a wandering monster or something?The lack of context is why this sort of question tends to be fairly meaningless, unless this is just a writing prompt for story telling. In which case, if you want someone to tell you a story, just say so!