How can I fix "No Command" problem in Recovery mode of my Android?
This applies to you if you experience any of the following:- Phone not restarting/rebooting during update - "No Command" message- Dead Android Robot or Exclamation Point in triangle- Green Android Robot (called "Andi")These are only shown when the Super User Access has been cancelled or denied during the installation process of:- app store (Google Apps Installer widget)- Fairphone OS software updateIn both these cases, you will need to enter Android Recovery Mode and manually finish installation. Tip: it sometimes helps to take out the SIM card(s) and the SD card.If you see a resting robot or an exclamation point in a triangle, then you are currently in this Android Recovery Mode. If you need to enter Recovery Mode.Once you are in Recovery Mode, follow these steps:NOTE: Before starting this step, disconnect all cables you may have connected to your Fairphone. Also, make sure your Fairphone is charged at least 80%.Press the Power button once. A menu will appear.Press and use the Volume Down to navigate down to "apply update from sdcard".Once this option is highlighted in blue, select this option by pressing Volume Up.Use Volume Down to navigate down to "updater". Select with Volume Up.Use Volume Down to highlight "fp_update_OTA[version number].zip" and select with Volume Up.Installation will take place.Once installation is complete you will see the message "Install from sdcard complete."Now you can reboot your phone. "Reboot system now" should be highlighted in blue. Press Volume Up to select it.