I'm not able to connect my dongle to a Windows 10 laptop. What should I do?
Just follow the steps below:Method 1 (Older Method works fine with Windows 8):1. uninstall the software if already installed.2. open the modem in new windows and set its (modem_installation.exeand show_modem.exe ) compatibility to windows7 then press OK.3. Now install the software , then restart the system .4. Connect the modem and start the software ( it shows no device ) then exit the application from the task manager .5. Open the Device manager ( control panel > Administrative tools > Computer management )6. Go for Other devices , simply uninstall all the drivers related to modem there (better uninstall both with or without yellow mark)7. Go to Action menu and click on Scan for hardware changes .8. Now simply open the MMX usb manager and it works fine.Method 2 (Updated Article January 2014 for Win 8/8.1 both):1. Install the MMX modem application in compatibility mode as above, then restart your system.2. Next go to your installation folder as:x64 bit OS –> C:\Program Files (x86)\MMX353G 3G USB Manager\Driver\Win7_64x32 bit OS –> C:\Program Files\MMX353G 3G USB Manager\Driver\Win7_323. copy the file cmnsusbser.sys and paste it to C:\Windows\System32\drivers folder do replace if any older version is already present. Better save the older file before replacing it with new one.4. Now, go back to installation folder and simply:right click cmnsmdm.inf and click install,then right click cmnsser.inf and click install.5. So its done then, only note that you must open the application from the desktop icon. Enjoy your MMX 3G modem in windows 8.1. Have fun guys.source: usb modem not working windows 8/8.1 (SOLVED)
Flashing Lots in Sims 2?
You said it started happening after you installed the Scriptorium? Because I think the scriptorium does install files in places besides your Downloads folder. I would recommend that you go back to MTS2, and to where you can get the Scriptorium and post a message on the thread there. If you scroll down to the very bottom of the page, there are posts. If you can't see them, then there should be a link at the bottom of the page that you can click on so you can see them. I wonder if Numenor just recently updated it and for some reason there is a problem with it that he's unaware of. Numenor is really good about responding to people's questions and posts about problems with anything he works on. If you do make a post explaining what happened, give him a little time to get back to you as he really does a lot of sims 2 things. If for some reason he doesn't respond within 3 or 4 days, I would click on his name, then find the link to go to his own personal site and then send an email to him. Every time I have had to ask him a question about something, he got back to me very quickly. Or, you can try to send him a Private Message through MTS2 PM system, but I think I read that he's not answering PM's. I can't remember though if that was Numenor or someone else on that site, so you can try. ---------------------------- eta -- I'm glad that you were able to uninstall it completely and that your problem is resolved now. I wanted to ask you though if you ever posted about your problem or let Numenor know about it in some way? If not, I can send an email to him and give him a link to this question so he's aware of the problem. I really think that if there is a problem, he should be told about it because if it happened to you, then there is a good chance that it's going to happen to other people as well. The sooner he finds out about it, the sooner he can fix it.
How do I fix the error code 0x80070422 in Windows 10 store?
If the Windows Update service not running is what is causing this issue in your case, you can free yourself of it and restore your ability to download applications from the Windows Store by simply configuring the service to start automatically. To do so, you need to:Configure the Windows Update service to start automatically:Press the Windows Logo key + R to open a RunType services.msc into the Run dialog and press Enter to launch the Services Manager.Scroll down the list of services, locate the Windows Update service and double-click on it to open its Properties.Open the dropdown menu in front of Startup type: and click on Automatic to select it.Click on Apply.Click on OK.Close the Services Manager.Restart the computer.This problem can also be resolved by creating and using a .BAT file designed to make sure that the Windows Update service and all other services that need to be running to successfully download and install applications from the Windows Store are not only running but are also configured to start at boot. In order to use this solution, you need to:Use a .BAT file to fix the problem:Press the Windows Logo key + R to open a RunType notepad into the Run dialog and press Enter to launch a fresh instance of Notepad.Type (or copy and paste) the following text into the fresh instance of Notepad:sc config wuauserv start= autosc config bits start= autosc config DcomLaunch start= autonet stop wuauservnet start wuauservnet stop bitsnet start bitsnet start DcomLaunchPress Ctrl + S.Open the dropdown menu in front of Save as type: and click on All Files to select it.Type repair.bat into the File name: field.Navigate to where you want the .BAT file to be saved.Click on Save.Navigate to where you saved the .BAT file, locate it, right-click on it and click on Run as administrator. The .BAT file will open an elevated Command Prompt, execute each of the required commands and then close the elevated Command Prompt, so all you need to do is wait.
How can I fix "No Command" problem in Recovery mode of my Android?
This applies to you if you experience any of the following:- Phone not restarting/rebooting during update - "No Command" message- Dead Android Robot or Exclamation Point in triangle- Green Android Robot (called "Andi")These are only shown when the Super User Access has been cancelled or denied during the installation process of:- app store (Google Apps Installer widget)- Fairphone OS software updateIn both these cases, you will need to enter Android Recovery Mode and manually finish installation. Tip: it sometimes helps to take out the SIM card(s) and the SD card.If you see a resting robot or an exclamation point in a triangle, then you are currently in this Android Recovery Mode. If you need to enter Recovery Mode.Once you are in Recovery Mode, follow these steps:NOTE: Before starting this step, disconnect all cables you may have connected to your Fairphone. Also, make sure your Fairphone is charged at least 80%.Press the Power button once. A menu will appear.Press and use the Volume Down to navigate down to "apply update from sdcard".Once this option is highlighted in blue, select this option by pressing Volume Up.Use Volume Down to navigate down to "updater". Select with Volume Up.Use Volume Down to highlight "fp_update_OTA[version number].zip" and select with Volume Up.Installation will take place.Once installation is complete you will see the message "Install from sdcard complete."Now you can reboot your phone. "Reboot system now" should be highlighted in blue. Press Volume Up to select it.