How can I convert a wifi dongle into wifi adapter?
Try this it worksYou should have elaborated your question, But still i will give a possible way to spread the internet in your computer or laptop through the WIFI Dongle you are havingIf you have a Computer with a internet connection via the Ethernet or USB etc. and if you want to spread that signals as WIFI using your dongle then follow these steps.Connect your Computer to Internet.Connect the Wifi Dongle to the computerOpen Network and Sharing CenterClick on the “Change Adapter Settings” optionYou will see the active internet connections and other devices in the window.Now select the active internet connection and the WiFi dongle using CtlrNow right click on one of them and Click on the “Bridge Connections” optionWait for few sec for it to complete the process.Now connect to the Dongle’s WiFi using any of your other devicesYou will have access to internet.
I'm not able to connect my dongle to a Windows 10 laptop. What should I do?
Just follow the steps below:Method 1 (Older Method works fine with Windows 8):1. uninstall the software if already installed.2. open the modem in new windows and set its (modem_installation.exeand show_modem.exe ) compatibility to windows7 then press OK.3. Now install the software , then restart the system .4. Connect the modem and start the software ( it shows no device ) then exit the application from the task manager .5. Open the Device manager ( control panel > Administrative tools > Computer management )6. Go for Other devices , simply uninstall all the drivers related to modem there (better uninstall both with or without yellow mark)7. Go to Action menu and click on Scan for hardware changes .8. Now simply open the MMX usb manager and it works fine.Method 2 (Updated Article January 2014 for Win 8/8.1 both):1. Install the MMX modem application in compatibility mode as above, then restart your system.2. Next go to your installation folder as:x64 bit OS –> C:\Program Files (x86)\MMX353G 3G USB Manager\Driver\Win7_64x32 bit OS –> C:\Program Files\MMX353G 3G USB Manager\Driver\Win7_323. copy the file cmnsusbser.sys and paste it to C:\Windows\System32\drivers folder do replace if any older version is already present. Better save the older file before replacing it with new one.4. Now, go back to installation folder and simply:right click cmnsmdm.inf and click install,then right click cmnsser.inf and click install.5. So its done then, only note that you must open the application from the desktop icon. Enjoy your MMX 3G modem in windows 8.1. Have fun guys.source: usb modem not working windows 8/8.1 (SOLVED)
My MTS Mblaze stick doesn't work on my Mac running the latest Yosemite. How can I make it work?
Here is the right solution for it MTS, TATA PHOTON, Reliance connent data cardDue to system integrity protection accordng to apple.even I had problem using my zte or hawai internet dongles while working in El capitan and yesomite oX.Here is final 100% percent working ! Quick fix until there will be released a driver update for ZTE dongles for OSX El Capitan. 1. Restart your laptop.2. press CMD R until it boots in recovery mode.3. once loaded, click on utilities > terminal.4. type: csrutil disable5. you'll a get a message says that csrutil is disabled.6. restart your mac and now you can connect your ZTE dongle cheers you are done connect and install driver software of your hardware be it zte or Hawai !
Is it possible to convert a 3G dongle to a 4G dongle manually?
Technically NO.But if you want to use a Reliance Jio Sim for your 3G Dongle then YES you can.Insert the pre activated Jio SIM Card in Your Dongle!The initial step of this process is to get your SIM card to be inserted in any dongle whether it be Airtel/ Huawei or any other dongle which has support for 4G/3G.Connect your dongle to your PC or Laptop and wait for the connection to establish.Set APNOnce after connecting your dongle, wait for a notification to occur. If that doesn't happen, just go to your dongle settings. If you're using Windows 8 and above, then you need to head over to the notification panel and set the APN settings as follows.Access Point Name: JionetStep 3: Set The APNThis can be done in multiple ways, some modems set manual APN so I first recommend you to check any webpage. If you got the internet connection, then there is no need to do anything. So if you didn’t got the internet follow this process. There are two ways which you can set-up APN you can follow any methodMethod 1:On the Notification bar right click on modem network connection. Then visit propertiesMethod 2: This can be done on the modem window.Right click anywhere in your modem and choose setting preferences.Above Image is just a sample image but if you have any modem from a manufacturer then you can those settings under the settings menu.Once after setting the access point name, leave all the columns empty and click on ok.Some Dongles Will Automatically Choose the APN Do make a note that, some dongles will automatically choose the APN.However, we recommend you to check the internet connection by opening your browser. If it doesn't load any web page, then you have the set the APN manually.Voila! You're Using Jio 4G with a Dongle If all goes well, you will be connected to the internet and will be able to use the Reliance Jio 4G on your laptop or PC with the help of a dongleIf you face any issues, reboot your system and try again.
How can I connect a USB dongle to my Android phone without rooting it?
Many people might have these 3G internet dongles lying around. which they use with their PCs and Macs. For people in many countries, the 3G speed might be faster than that of their home broadband internet connection.People who have tablets without 3G support might find the need to use these dongles with their device to get something downloaded quickly when the broadband is down. This can be done using an Android app called PPP Widget. As the name suggests, it is a widget, not an app.It is available in the Play Store and it is free. Download it to your device from here. You will need to be rooted and you must have a USB OTG cable. Depending on the type of USB port on your device you will have to get a Mini-USB or Micro-USB OTG cable.These cables can be easily purchased from Amazon, eBay or any other local store for around 2$ to 3$. Here are a few links- Amazon, eBay.Your device must also support the USB host feature. Most devices do come with this support. You can check with Google whether your device has support for USB host. If you are running a custom ROM with a kernel modified by the dev, you will most likely have support for it.Install PPP Widget from the Google Play Store from herePlace the widget on your home screen. Connect the dongle via the USB OTG cable.You will get a popup asking you if you want PPP Widget to open up whenever this device is connected.Tick the Use by default for this USB device option and hit OK.You might get this popup many times. Do the same step given above all the times. Once the status changes to Disconneted, hit the connect button.You will get a screen like this. Choose the first option- – Access Point Name.Refer to this link and lookup the APN for your carrier. Enter the Dialling string based on your carrier. CDMA – #777 , GSM – *99***1#.Once you are done, go back to the homescreen and hit the Connect ButtonThere you go. Now you have the internet from your 3G dongle on your Andorid device. Check the WiFi network name in the Notifications and it should be PPPWidgetThere you go, you have your 3G dongle working on your Android device. Check the video below for a tutorial.I hope it helps…
I'm not able to access internet on my desktop PC (using a WiFi adaptor) but I am able to on my phone. Both are connected to the same network. Please help?
Go to wifi status window, some window like below (this is for LAN, as in my laptop as of now, but similar for wifi.) and check for IPv4 connectivity, it should show "Internet".If yes, go to properties and click TCP/IP protocol settings (something like this), and check obtain network address dynamically (default DNS settings).
I can not able to open website called extratorrent.com?
I tried 1.reinstalling browsers 2. used firefox, chrome, IE8 3.reinstalling my datacard driver software Am using mts mblaze modem 3.1mbs i tried pinging the same website it says request timed out other websites works well with max speed ... Any one help me
How can I connect a Synology NAS wireless to WiFi using a dongle?
Not sure why you’d want to do this on purpose. You’re far better off plugging a wire into your Ethernet network, and then if you need to access the NAS from a wireless device, add an access point to your ethernet network. Otherwise your network performance to the NAS is going to be absolutely terrible, not just because of the wireless, but also because of the inherent speed limitations of USB.If you’re using a consumer-grade all-in-one “router”, you’ve already got everything you need, just plug the NAS into the LAN side.It may be possible to add a USB network interface, but it would need to be one that is supported by the NAS operating system’s kernel and you would need to be able to configure it manually from a commandline.This advice applies to any NAS, not just Synology.