Will A Side Mirror If A 2004 Acura Tsx Fit On A 2002 Acura Tl

Why do my hazard lights work, but not my turn signals?

Hazard lights and turn signals use the same bulb, so it is not the bulb, the lamp, or the cables to them. Turn signals only work when the ignition is on; hazard lights work whether the ignition is on or not. The two systems have separate power supplies, so they have separate fuses. You may have a blown fuse.Different vehicles use different circuits, and it is not possible to accurately diagnose the fault with the small amount of information provided. You need a circuit diagram and a voltmeter, and a continuity tester. First locate and test the turn signal fuse. Do you have voltage to and from the turn signal switch?The hazard light switch is not a simple on/off switch. In the “on” position, a fused battery feed connects to left and right turn signal. In the “off” position, the left turn switch wire is connected to the left turn lamp and the right turn switch wire is connected to the right turn lamp, so there are 3 inputs and 2 outputs.The fault could be a fuse, turn signal switch, hazard switch, flasher unit, or a broken wire or connection.

How do you fix a power window that won't go up?

OK, I'm the expert on this one since this is all we do. Specifics are at Power Window Repair Tampa or you are welcome to ask here. In general,If you hear a click as you depress the switch down but no click as you press the switch to go up it might be the actual multi button window switch. Usually if one switch is bad neither switch works.If you hear a click in both directions it might be the window motor. Some can be changed alone, some require you to change the entire assembly (with the regulator). If you want to get the window back up try this. Start the vehicle, open the door, with one finger on the button to put the window up slam the door closed with your other hand. Might get the window working again for a time.If you hear a crunching, grinding sound your regulator (the cables that pull the glass up and down on a metal cross bracket)  is usually broken. If you can get the door panel off you can probably push the glass up by hand. If you encounter resistance it is ok to cut the metal cables (never cut an electrical wire) as your get new cables with the new regulator.NEVER try to pull the glass up with a pair of pliers. Glass is pretty strong stuff but much like a diamond can be shattered.To answer your question as to how to repair a specific window would need to know year, make, and model. A youtube search will uncover videos of how to.