I am facing Network Connection Problem with Samsung Galaxy J2. Every time I need to restart my phone to fix that issue. Did anybody have resolution for this?
I don’t think there’s any major issue from your network provider’s side. I’ve a SG-J5 and mine disconnects from internet in every 3–4 mins. The network connectivity is very good here & other mobile phones run well with the same network/career. This can roughly be a hardware defect. When it was new it worked fine, but things went worse when I opted an OTA security update.Here’s what I can suggest you :-If you recently have updated your firmware or installed any updates OTA, try Factory Reset. And kindly report back if it works for you.This I think is a bit difficult. You need to bake a new kernel for your device (but yes need to be a linux kernel dev :\ . Even such a professional will think twice before giving it a go. However, if you are still interested, you can google the Kernel Source for your device & fetch them & bake a new one.) If you’ll be very lucky, you’ll only need to reconfigure the radio module.Remove the back panel of your device. Restart your device and leave the back of your phone bare naked. Don’t attach the panel. Now play with your device, and report back if it works for you.Try changing the Network Operator from Select Automatically to Manual. If doesn’t work, stick with Select Automatically. Try with different Network Modes, & the one which works for you.Try your sim card in other mobile phone. If same issue occurs there, then it’s definitetly a problem at network side. But if it works well, then unfortunately you’ll have to follow the step 5.Best choice will be to call a Service Center & follow the procedure. They’ll most likely replace the motherboard of your device.Tinkering directly with the firmware of your device can void the warranty of your device. I’ll not be responsible for it. I’ll not be resposible for any damages you may inflict upon your li’l smartphone while following the suggestions I’ve written.P.S. - Factory Reset didn’t work for me. Imagine network disconnectivity every 3–4 mins. :|
My Zeo is paired but not connected?
My new zeo arrived yesterday, so I decided to try it out. After i paired my zeo band with my phone via bluetooth, I took it off its charging dock and wrapped it around my head, then fell asleep. When I woke up and placed the band on the charging dock, there was no connection to my device and none of my sleep stats were tracked. On further inspection, in my bluetooth manager tab, it states that the zeo is "paired but not connected". I have the mytouch 3g slide, and it is an android phone. My question is, how can I take my paired device, the zeo, and actually connect it to my phone?
Problem updating firmware in samsung galaxy s2?
Whenever i try to update my firmware from my samsung galaxy s2 thru wifi or 3g, error comes "connection failed" and when i connect my mobile thru kies to pc than it shows that u have latest firmware version installed. If anyone has information and solution regarding this, than please help me out.
How can I fix "No Command" problem in Recovery mode of my Android?
This applies to you if you experience any of the following:- Phone not restarting/rebooting during update - "No Command" message- Dead Android Robot or Exclamation Point in triangle- Green Android Robot (called "Andi")These are only shown when the Super User Access has been cancelled or denied during the installation process of:- app store (Google Apps Installer widget)- Fairphone OS software updateIn both these cases, you will need to enter Android Recovery Mode and manually finish installation. Tip: it sometimes helps to take out the SIM card(s) and the SD card.If you see a resting robot or an exclamation point in a triangle, then you are currently in this Android Recovery Mode. If you need to enter Recovery Mode.Once you are in Recovery Mode, follow these steps:NOTE: Before starting this step, disconnect all cables you may have connected to your Fairphone. Also, make sure your Fairphone is charged at least 80%.Press the Power button once. A menu will appear.Press and use the Volume Down to navigate down to "apply update from sdcard".Once this option is highlighted in blue, select this option by pressing Volume Up.Use Volume Down to navigate down to "updater". Select with Volume Up.Use Volume Down to highlight "fp_update_OTA[version number].zip" and select with Volume Up.Installation will take place.Once installation is complete you will see the message "Install from sdcard complete."Now you can reboot your phone. "Reboot system now" should be highlighted in blue. Press Volume Up to select it.
Connection Failed? ~ Galaxy S2?
Hey, I've bought a brand new Samsung Galaxy S2 2 days ago, every thing's fine and i'm very. very happy with it. except for when my friend told me to "update" it. So Here's the deal: I got Galaxy S2 GT-I9100 . Android version : 2.3.5. -I Connect to my router using WiFi and attempt to update, it says Connection Failed. -I Connect to my 3G connection "Got free net bundle" and it says Fonnection Failed. -I Borrowed net from my neighbors and yet again it says Connection Failed. -I Tried connecting to my PC using USB adapter and "Kies" but it keeps giving me Connection Failed. -I tried Google. But i didn't understand what the "root" thing is . and don't know if my phone is rooted or not. Any help is greatly appreciated. Thanks.
Can anyone please tell me how to upgrade my nokia c6 01 phone from symbian anna to symbian belle os?
Latest version available for Nokia C6-01 is Symbian Anna (025.007). But you can check for latest time to time in the attached link.
IPhone 3G Won't Jailbreak after previous Open iBoot Installation?
Hello, Today I decided to ditch iOS 3.1.2 on my iPhone 3G (Which I recently replaced with an iPhone 4, but still use for Jailbreaking/Development) and upgrade to 4.1. I had previously installed open iboot on the device to run Android (just for fun) and when I updated the OS, all went well but when i ran limera1n (Which I also used for my iPhone 4) it would go into DFU mode, but limera1n would hang at "In DFU Mode...wait." the iPhone would reboot to the "Connect to iTunes" Screen, and would need to be restored. After trying this again on my Mac (And failing) I decided to flash 3.1.2 back. After the restore, it booted to the "Connect to iTunes" screen, but I ran blackra1n anyway (on my mac, since the PC version crashes, and apparently, thats what happens with iTunes 10.0.1 and older firmware, but correct me if i'm wrong) After running blackra1n, the phone booted up, and I installed Cydia via the blackra1n app. After launching cydia, and waiting for the "Reorganizing, will close when done" to finish, I relaunched Cydia, and after staying at the loading screen for a minute, or two, the app crashed, and continues to do so everytime I launch it. I decided to restore, and re-jailbreak using the same method, but achieved the same results. I'm thinking that having open iboot previously in the bootrom might be messing things up, but I can't be sure. If i can't get this working, I'm stuck with an un-jailbreakable paperweight (Even though it runs stock 4.1 fine). I'm pretty much limited to limera1n, and blackra1n on my Mac, since they still work, unlike most programs (like sn0wbreze, and blackra1n PC) which crash with the newest version of iTunes. I also have my originalbootrom.dump from when I installed Open iBoot, if that helps...