How do I extend the Wi-Fi range of my router?
It turns out that most Wi-Fi routers sold are already operating at their maximum power already, so there are only a few things that you can do:Raise the router. Most likely, your router is trying to send a signal through a wall, furniture, pipes, etc. All of this impedes signal. You really want Line of Sight (LoS) between your router and your device, but this is hard to get. If you raise your router up, then it'll usually have a clearer view and be able to have more range. A common hack is to toss it on the top shelf of a closet or bookcase. More permanently, if you can attach it to a wall or ceiling, that can help too.Change frequencies. Be sure to try both the 2.4Ghz (802.11b, g) and 5Ghz (802.11a, n, ac) frequencies. Sometimes one frequency will work when the other has interference or attenuation.Change channels. In the 2.4Ghz spectrum, in the US, there are only three true channels: 1, 6, and 11. If you do a survey of your space, you may find that you have competition on one of these channels. Changing to an unused channel can help a great deal.Change the antenna. If you have an older router, you probably have detachable antennas. If so, then you can swap out the generic omnidirectional antenna for a directional one and a few meters of coax. This will allow you to move the antenna closer to where you want it to be, and allow it to focus on the areas that you want to cover.Run an Ethernet cable. If you need to go a long distance, can you just throw a cable there? One end in a switch port, and one end to your laptop. This is cheap, easy, provides better security and better performance.Run an Ethernet cable to another Access Point (AP). Buy yourself an access point (or a router with an AP mode). Position it closer to the target area, and run a cable to it. Put the AP on a different channel than your router to avoid interference.Buy a repeater. This is the last option, because it costs you in bandwidth. Basically this is a device that sits between your device and the router and simply retransmits everything that it has heard.
Will a linksys wireless-G broadband router extend signal?
I live in an area where they say WiFi is not available, but the building next door to me allows me to connect thru its signal, so I assume that the wireless signal that I'm getting is broadband. My delima is that I cannot move my laptop out of my bedroom without losing signal. Can I connect a linksys wireless-G router to my laptop in bedroom and then take other wireless capable laptop to other area of house and pick up signal.
How do I use a wireless router as an adapter?
Detailed instructions....First... what is the SOURCE of your internet connection? Teh Internetz don't just flow from wireless routers. Teh Internetz has to start from somewhere... a cable model, a DSL model, a hotspot somewhere, a tethered phone... so, your experience with the Windows 7 machine seeing the network from the router but not getting on the internet makes sense... considering how you have said nothing about where the router is supposed to get the internet connection from, to be able to turn around and share it with all the other computers.So, for all you know... the router could be working perfectly. You just may not be seeing any internet access, because you don't actually have internet access on that specific network. Nothing you've said details that you do.Also, not every router can work as a range extender/Wireless Bridge. How to set up a Wireless Bridge between two Belkin routers Those are the generic instructions... and you could substitute the MAC address of the second router, with the MAC address of the WiFi adapter in your phone, if you wanted to attempt to bridge your router with the phone.Otherwise, with what you have to work with... as inconvenient as it seems, you might be stuck with tethering your phone.
Which wireless router brand is better, Netgear or Linksys? Why?
The brand doesn't matter really, access point does. I love the flexibility of Netgear products and the sturdity of Linksys, but you need to understand that sometimes the 2.4GHz wavelength could be crowded while a Linksys WRT54X with the DDWRT firmware are quite ool and they can beat most wifi routers in terms of signal strength.These guys did a comparison on the two:1. Linksys WRT1900AC & Netgear Nighthawk R70002. Which Router should you buy?You can also check this video:
How should I setup my home internet/wireless network?
Here is what I have...Netgear R6200 and Linksys EA4500. I have a desktop in my office at the moment with the EA4500 (primary router) in the same room. Wired connection to desktop, Xbox 360 and a wire through my home (walls and all) to our master bedroom cascaded with the R6200 (secondary router) as LAN-LAN. I am wanting to know if this is the best way to do it or not. I have been researching the heck out of this. Should I switch the routers to make the R6200 the primary? Should I use LAN-WAN? The other thing is that I have a smart tv in my living room that I currently use Wifi connection on, but I am a man and want the best picture. Should I hardwire with Ethernet powerline extenders from primary router? Or should I get a second modem, uncascade the two routers, keep one modem/router in the office and the other modem/router next to the tv, thus having two separate router setups? My overall plan is to build a media server from scratch to have EVERYTHING on it and be able to stream to any device, including the TV. This will allow me to get rid of blu ray player, cable and all my external hard drives. Just have one centralized media server. Which leads to one last question, how can I stream stuff from the server to the smart TV? Media Extender? I want to be able to control it with remote. I do not want to display mirror. Any and all information and help would be greatly appreciated.
Best wireless router for 2 story home.?
There is no such thing. A router antenna is designed to radiate outward. Not upward and downward. Mount the router you have closer to the ceiling between the floors. Even then, you need to consider the fact that house wiring, duct work, appliances, even people moving etc all have an adverse effect on radio signals. Over 30 years in communications and currently designing Industrial WIFI systems, I'll be the first to tell you I wouldn't use a wireless network short of mobility for browsing the internet. Streaming, downloading, and gaming online gets done on my wired systems.
How do you find out how far a wireless router reaches?
The only sure-fire test is to walk around with a few laptops and survey the strength in different areas. They usually reach 500 feet with no obstructions or interference (aka the middle of the desert). The new 802.11n is supposed to reach farther but I've never seen one in action so I don't know. Make sure your router is as high as possible - and away from metal and electric stuff. If you have 2.4GHz phones replace them with something like 5.8GHz or 900MHz. Microwave ovens cooking also interfere. If you have wireless video senders or cameras that are on 2.4GHz consider turning them off when you need better range or installing wired ones. Some things can specify a channel, put your network as far away from other things as you can (e.g. network on channel 11 and video sender on channel 1/A) You could always get a range-extender (such as the Belkin WURE) that rebroadcasts the signal from another room so it's stronger. Faster and more reliable you could run cable to another location and set up an Access Point (or router configured to AP mode) and give it the same SSID & Security. This will extend the reach without sacraficing bandwidth. Before you go all-out with expenses, I just found this site where you make a reflector of photopaper or cardstock and aluminum foil backing. It seems to help if you want to extend distance in one direction, I went from 45% to 95% pointing it at my basement but it cuts the range in other directions it's not pointed. For a piece of paper and cooking foil it's cheap enough to try first - if it doesn't help you haven't lost anything but a few mintues of time. http://www.freeantennas.com/projects/tem...
What is the difference between a router and an access point?
Access Point or Wireless Router? Get to Know the Main differences between access point and routerA router is a device that sends packets to destinations (routes them).And an access point is a device that allows wireless devices to connect to it by means of the antennas.You can have at home, a wireless router, which is the common standard for most users. Those devices actually can excecute functions of routers, switches, DHCP servers, DNS server and Access points. It’s a cool 5 in 1Also, you can have a standalone access point and it would be connected to some switch/router to allow users connecting wirelessly have their traffic routed.An access-point may be also configured as wireless router (maybe a wireless nat router), but also as a bridge between wireless network and wired network. So an access-point may be a router but is not necessarily one...A router can be an access point but an access point can’t be a router.The access point is just that, an antenna to allow wireless clients to connect. But, the actual work is done by a router. Usually the access points are managed by a WLC (Wireless Lan Controller) in enterprise environments. If it’s an standard alone Access Point, it will be connected to another device unless it has a routing function built-in.Just to be clear, they are different devices. Nowadays several functions can be executed by the same device because of several technologies together inside it. But, it doesn’t mean they are not different in essence and meaning.I thought about writing "an access-point is only a bridge between wireless and wired networks", but most standalone access-points nowadays may also be configured as wireless routers (yes, there are some, that can't be configured as routers, I have such an access-point at home, but most current models can usually also be configured as wireless routers).info：The Main differences between access point and router
What is the range of the Wifi in 5Ghz and 2.4GHZ?
A general rule of thumb in home networking says that WiFi routers operating on the traditional 2.4 GHz band reach up to 150 feet (46 m) indoors and 300 feet (92 m) outdoors. Older 802.11a routers that ran on 5 GHz bands reached approximately one-third of these distances. Newer 802.11n and 802.11ac routers that operate on both 2.4 GHz and 5 GHz bands vary in the reach similarly.Physical obstructions in homes such as brick walls and metal frames or siding reduce the range of a WiFi network by 25% or more. Due to laws of physics, 5 GHz WiFi connections are more susceptible to obstructions than are 2.4 GHz.Radio signal interference from microwave ovens and other equipment also negatively affects WiFi network range.